Practice question set with answers. Use deep links to save questions.
Showing page 8 of 9 (656 solved practice questions with detailed explanations for structured topic-wise revision).
561. On adding some detergent to water, the surface tension
- A. Decreases
- B. Remains same
- C. Increases
- D. Initially decreases then increases
Correct Answer: Decreases
Concept & Solution Analysis: When detergent is added to water, it decreases the surface tension of the water. Compounds that lower water's surface tension are called surfactants which work by separating the water molecules from one another.
562. Which of the following is the power’s formula?
- A. P=V2 /R
- B. P=V×I
- C. P=I2 ×R
- D. All of these
Correct Answer: All of these
Concept & Solution Analysis: All the formula given in the options are formula of power. power = V2 /R = V × I = I2 × R Unit of power is Joules /sec or watt.
563. In which of the following mediums does the sound travel fastest at a particular temperature?
- A. Water
- B. Air
- C. Glasss
- D. Iron
Correct Answer: Iron
Concept & Solution Analysis: Speed of sound in different medium at 250 C substance speed in m/s Iron 5950 Glass (Flint) 3980 Water (sea) 1550 Air 346
564. In which medium does sound travel at maximum speed?
- A. Solid
- B. Fluid
- C. Equal motion in gases and liquids
- D. Gas
Correct Answer: Solid
Concept & Solution Analysis: The speed of sound is maximum in solids and least in gases. Solid state is one of the four fundamental states of matter, in which the constituent particle (ions, atoms, etc) are closely packed together.
565. The speed of sound depends on which property of the medium.
- A. All of these
- B. Temperature
- C. Elasticity
- D. Moisture
Correct Answer: All of these
Concept & Solution Analysis: Sound is a mechanical wave and requires some medium for transmission. When we move from solid (more elastic medium) to gaseous state (less elastic medium), the speed of sound decreases. Increasing the temperature in any medium the speed of sound increases because molecules at higher temperatures have more energy and can vibrate faster and allow sound waves to travel more quickly.
566. The easiest method of maintaining the electric potential difference between the two ends of a conductor is to connect it between the terminals of ………… to get a continuous flow of current.
- A. Voltmeter
- B. Ammeter
- C. Rheostat
- D. Battery
Correct Answer: Battery
Concept & Solution Analysis: The simplest method of maintaining the electric potential difference between the two ends of a conductor is to connect it between the terminals of the battery to obtain a continuous flow of current. Ammeter:- An Ammeter is a measuring instrument used to measure the electric current in a circuit. Electric current are measured in Amperes (A). Voltmeter:- A Voltmeter is a measuring instrument used to measuring electric potential difference between two points in an electric circuit. Rheostat:- A rheostat is used vary the resistance of the circuit.
567. Which technique is used to determine the depth of the ocean, explore underwater hills, valleys, submarines, icebergs etc.?
- A. Absorbent sound
- B. Sound absorption
- C. SONAR
- D. MRI
Correct Answer: SONAR
Concept & Solution Analysis: The SONAR technique is used to determine the depth of the ocean, explore underwater hills, valleys, submarines, icebergs etc. SONAR stands for Sound Navigation and Ranging. It is based on the principle of echo.
568. What is the repeated reflection of sound from the walls of a large hall, which results in the persistance of sound?
- A. Pitch
- B. Music
- C. Note
- D. Reverberation
Correct Answer: Reverberation
Concept & Solution Analysis: Reverberation : When a sound is produced in a big hall or auditorium, the sound waves suffer multiple reflection from the walls, ceilings and other materials present in the hall. Due to this the sound persists for some time even after the source of sound has stopped producing sound. This persistence of sound due to repeated reflection is called reverberation.
569. Which of the following determines the loudness or softness of a sound?
- A. Wave velocity
- B. Oscillation
- C. Frequency
- D. Amplitude
Correct Answer: Amplitude
Concept & Solution Analysis: Loudness is physiological response of the ear to the intensity of sound. It distinguishes between a loud sound and a low sound. Loudness depends on two factors : (i) Intensity of sound which is directly proportional to the square of amplitude of the sound wave. (ii) Sensitivity of the ear.
570. Which of the following represents the distance travelled by a wave in one second?
- A. Time period
- B. Wavelength
- C. Wave velocity
- D. Frequency
Correct Answer: Wave velocity
Concept & Solution Analysis: Wave velocity:- The distance travelled by a wave in one second is called the velocity of that wave. Its S.I. unit is meter per second (m/s). Wavelength:- The distance travelled by the wave in one time period of vibration of particle of medium is called its wavelength. Its S.I. unit is meter (m). Frequency:- The number of vibrations made by a particle of the medium in one second is called the frequency of the waves. Its S.I. unit is hertz (Hz) or Per sec. Time Period:- A time period is the time taken for one complete cycle of vibration to pass a given point. It is denoted by T. Its S.I. unit is sec.
571. The frequency of a sound wave is 50 Hz and its wavelength is 4 meters. What is the speed of sound wave?
- A. 200 m / s
- B. 100 m / s
- C. 80 m / s
- D. 400 m / s
Correct Answer: 200 m / s
Concept & Solution Analysis: In competitive exam questions on Physics – Miscellaneous, "200 m / s" directly satisfies the factual and conceptual condition asked in the stem, whereas options such as 100 m / s and 80 m / s represent common distractor traps. Record this rule in your revision notes for quick pre-exam recall.
572. Which device converts sound waves into electrical signals?
- A. Microphone
- B. Loud speaker
- C. Headphone
- D. Amplifier
Correct Answer: Microphone
Concept & Solution Analysis: The microphone converts sound waves into electrical signals. Loud speaker converts electrical energy into sound energy. Amplifier is an electronic device that can increase the voltage and power of a signal. Headphone are a hardware output device that plug into a computer line out or speaker port
573. What is the rate of electrical work or the rate of expenditure of electric energy?
- A. Work
- B. Stream
- C. Potential
- D. Power
Correct Answer: Power
Concept & Solution Analysis: The rate of electrical work or the rate of electric energy expenditure is called electric power. Its unit is watt or Joule/sec.
574. What does the rating of electricity displayed on the electric bulb mean 100 watts?
- A. The bulb consumes 100 joules of electrical energy per hour.
- B. The bulb consumes 100 joules of electrical energy per second.
- C. The bulb consumes 100 joules of electrical energy per minute.
- D. The bulb consumes 100 kg of electrical energy per hour.
Correct Answer: The bulb consumes 100 joules of electrical energy per second.
Concept & Solution Analysis: A rating of 100 watts of electricity displayed on an electric bulb means that the bulb consumes 100 joules of electrical energy per second. Because 1 watt = 1 Joule /sec 100 watt = 100 Joule/sec.
575. When two or more resistors are connected sequentially to each other, they are attached
- A. In line
- B. In parallel
- C. In series order
- D. Directly
Correct Answer: In series order
Concept & Solution Analysis: When two or more resistors are connected sequentially to each other, they are connected in series order. Resistors Connected in series Equivalent Resistance eq 1 2 3 R = R + R + R For a series connection of resistors, the current is the same in each resistor.
576. Which of the following substances has very high resistance?
- A. Conductor
- B. Semi conductor
- C. Insulators
- D. Superconductors
Correct Answer: Insulators
Concept & Solution Analysis: An electrical insulator is a material whose internal electric charges do not flow freely, and therefore make it very hard to conduct an electric current under the influence of electric field. And those substances have infinite high electrical resistance. Ideally, the insulation resistance would be infinite but as no insulators are perfect, leakage currents through the dielectric will ensure that a finite (though high) resistance value is measured.
577. If two resistances of 2 Ω are connected in parallel, what will be the resulting resistance?
- A. 2Ω
- B. 0.5Ω
- C. 1Ω
- D. 3Ω
Correct Answer: 1Ω
Concept & Solution Analysis: In competitive exam questions on Physics – Miscellaneous, "1Ω" directly satisfies the factual and conceptual condition asked in the stem, whereas options such as 2Ω and 0.5Ω represent common distractor traps. Record this rule in your revision notes for quick pre-exam recall.
578. Four resistors of 1 Ω are connected in series order, find the resulting resistance.
- A. 1Ω
- B. 8Ω
- C. 4Ω
- D. 1/4Ω
Correct Answer: 4Ω
Concept & Solution Analysis: Total resistance of resistors connected in series order (R) = R1+R2+R3 + R4 R = 1 + 1 + 1 + 1 R = 4 Ω Alternative Method:- If n resistor are connected in series then equivalent Resistance. eq R = nR Here given R = 1 Ω n = 4 So, Req = 4 × 1 eq R = 4Ω
579. When two or more resistors are connected between two identical points, then they are associated with. . . . . . .
- A. line
- B. range
- C. parallel
- D. across
Correct Answer: parallel
Concept & Solution Analysis: In competitive exam questions on Physics – Miscellaneous, "parallel" directly satisfies the factual and conceptual condition asked in the stem, whereas options such as line and range represent common distractor traps. Record this rule in your revision notes for quick pre-exam recall.
580. Resistance (R) = Voltage (V) / ………………….
- A. Current
- B. Work
- C. Charge
- D. Power
Correct Answer: Current
Concept & Solution Analysis: In competitive exam questions on Physics – Miscellaneous, "Current" directly satisfies the factual and conceptual condition asked in the stem, whereas options such as Work and Charge represent common distractor traps. Record this rule in your revision notes for quick pre-exam recall.
581. If the potential difference between the ends of a conductor is doubled, what will be the effect on the current flowing in it?
- A. will be doubled
- B. will be four times
- C. will be halved
- D. will be reduced
Correct Answer: will be doubled
Concept & Solution Analysis: In competitive exam questions on Physics – Miscellaneous, "will be doubled" directly satisfies the factual and conceptual condition asked in the stem, whereas options such as will be four times and will be halved represent common distractor traps. Record this rule in your revision notes for quick pre-exam recall.
582. Besides,…...... non-metals are bad conductors of electricity.
- A. Graphite
- B. Nitrogen
- C. Sulfur
- D. Hydrogen
Correct Answer: Graphite
Concept & Solution Analysis: Besides graphite, non metals are bad conductors of electricity. In graphite each electron is bonded to three other carbon atoms hence leaving behind a free electron. Due to the presence of the one delocalised electron, graphite is a good conductor of electricity.
583. Which of the following is a conductor of electricity?
- A. Copper
- B. Sulfur
- C. Phosphorus
- D. Nitrogen
Correct Answer: Copper
Concept & Solution Analysis: Copper is a conductor of electricity. A conductor is an object or type of material that allows the flow of charge in one or more direction.
584. Which of the following is proportional to the Potential difference?
- A. Resistivity
- B. Time
- C. Power
- D. Current
Correct Answer: Current
Concept & Solution Analysis: The current flowing in a conductor is proportional to the potential difference at the ends of the conductor. V ∝ I V = IR Where R is resistance.
585. If electric charge flows through any point of a circuit in 1 second is 20 coulombs. Find the value of electric current flowing through it
- A. 10 amperes
- B. 20 amperes
- C. 5 amperes
- D. 15 amperes
Correct Answer: 20 amperes
Concept & Solution Analysis: In competitive exam questions on Physics – Miscellaneous, "20 amperes" directly satisfies the factual and conceptual condition asked in the stem, whereas options such as 10 amperes and 5 amperes represent common distractor traps. Record this rule in your revision notes for quick pre-exam recall.
586. Electric current is the flow of ––––––––.
- A. Wave
- B. Electric charges
- C. Water
- D. Light
Correct Answer: Electric charges
Concept & Solution Analysis: The rate of flow of charge through an electric conductor is called electric current. Q I t = Where, I = current, Q = flowing charge, t = time
587. The formula for electric current is I = ……… / time (t).
- A. Charge
- B. Power
- C. Resistance
- D. Volt
Correct Answer: Charge
Concept & Solution Analysis: If a charge Q passes through a cross-section of a conductor in time t, then the current is given by Q I t = The SI. unit of electric current is ampere (A).
588. What will be the effect on the current if the resistance of a circuit is reduced to half, keeping the voltage remains constant?
- A. Will be halved
- B. Will be doubled
- C. Will be one fourth
- D. Will be four times
Correct Answer: Will be doubled
Concept & Solution Analysis: In competitive exam questions on Physics – Miscellaneous, "Will be doubled" directly satisfies the factual and conceptual condition asked in the stem, whereas options such as Will be halved and Will be one fourth represent common distractor traps. Record this rule in your revision notes for quick pre-exam recall.
589. If many bulbs are connected in parallel combination in a circuit and one bulb fuses, what will be happens with the other bulbs?
- A. All other bulbs stop glowing
- B. Some bulbs glow and some do not glows
- C. Some bulbs burst.
- D. All other bulbs glowing
Correct Answer: All other bulbs glowing
Concept & Solution Analysis: In the parallel connection of bulbs, the positive terminals of the bulbs are connected together to the positive terminal of the battery. The second terminals of the bulbs are connected to the negative terminal of the battery when one of the bulbs is fused or disconnected, electricity stop flowing only through the faulty bulb. For other bulbs there is still path to flow electricity. Hence, the remaining bulbs still continue to glow.
590. A closed and continuous path of electric current circuit is called?
- A. path
- B. electric circuit
- C. mesh
- D. loop
Correct Answer: electric circuit
Concept & Solution Analysis: Electric circuit–The closed and continuous path of an electric current is called an electric circuit.
591. When white light, which is a mixture of seven colors, passes through a prism, why is it dispersed?
- A. White light emits 7 colors throughout the prism.
- B. 7 colors of white light pass through Glass prism at different speeds.
- C. Colors are reflected by prisms.
- D. 7 colors are refracted at the same speed.
Correct Answer: 7 colors of white light pass through Glass prism at different speeds.
Concept & Solution Analysis: When white light passes through a prism of Glass, it is divided into seven different colors after refraction. This phenomenon is called a chromatic deflection and a group of seven colors is obtained. Character deflection is caused by the different movement of light of different colors in a transparent material.
592. Which of the following colors of white light has the highest wavelength?
- A. Purple
- B. Orange
- C. Red
- D. Green
Correct Answer: Red
Concept & Solution Analysis: The ascending order of the colors in the visible spectrum according to their wavelength is as follows- Violet<Indigo<Blue< Green < Yellow < Orange < Red. Hence red light has wavelength.
593. Which among the seven colours of white light gets least devialet after the refraction of light through a prism of Glass?
- A. Blue
- B. Violet
- C. Red
- D. Orange
Correct Answer: Red
Concept & Solution Analysis: From the seven colours of white light, the red colour is the least deviated after the refraction of light through a prism of Glass.
594. Which of the following does not have an optical lens?
- A. Periscope
- B. Telescope
- C. Microscope
- D. Stethoscope
Correct Answer: Stethoscope
Concept & Solution Analysis: The Stethoscope is the medical device that is used to listen to the internal sound of the human and animal body and it does not have any lens.
595. A ray of light passing through the optical center of a concave lens, emerge after refraction will be.
- A. Without any deviation
- B. From the principal focus
- C. Center of curvature
- D. Parallel to principal axis
Correct Answer: Without any deviation
Concept & Solution Analysis: A ray of light passing through the optical center of a concave lens emerges after refraction will be without any deviation. When a Ray of light passes through the optical center, it is perpendicular to the curved surface, hence angle of incidence is zero, hence angle of reflection is also zero.
596. The focal length of a convex lens is 2.5 m. Find its capacity.
- A. 0.3 D
- B. 0.4 D
- C. 0.2 D
- D. 0.5 D
Correct Answer: 0.4 D
Concept & Solution Analysis: In competitive exam questions on Physics – Miscellaneous, "0.4 D" directly satisfies the factual and conceptual condition asked in the stem, whereas options such as 0.3 D and 0.2 D represent common distractor traps. Record this rule in your revision notes for quick pre-exam recall.
597. Why does sky appear blue?
- A. All colors of white light, except blue, are most strongly engraved by air molecules.
- B. The light of all colors is in the correct proportion.
- C. Blue wavelength is relatively low as white light and it is most scattered by air molecules.
- D. White light is reflected by all the air molecules.
Correct Answer: Blue wavelength is relatively low as white light and it is most scattered by air molecules.
Concept & Solution Analysis: When a white light (from sun) enters the earth's atmosphere, it gets scattered away due to the atmospheric particles. Since, blue colour has the minimum wavelength, so blue colour scatters the most and thus the sky appears blue.
598. The twinkling of stars at night is caused by ……….
- A. Atmospheric refraction
- B. Dispersion of light
- C. Reflection of light
- D. Scattering of light
Correct Answer: Atmospheric refraction
Concept & Solution Analysis: The refraction of light by various layer of different refractive indices is the explanation for the twinkling of star. Stars emit light, on entering the earth's atmosphere the light undergoes refraction by many layer of earth's atmosphere with different refractive indices before it reaches on the earth. That is why we see the twinkling of stars.
599. What is the concept of spherical mirror?
- A. Radiation of light
- B. Refraction of light
- C. Scattering of light
- D. Reflection of light
Correct Answer: Reflection of light
Concept & Solution Analysis: A spherical mirror is simply a piece cut out of a reflective sphere. There are two, types of spherical mirror concave and convex mirrors. If the mirror’s inside surface is reflective, the mirror is concave. If the mirror’s outside is reflective, it is convex mirror.
600. A ray of light appearing to meet at the principal focus of a concave lens emerge after refraction.
- A. parallel to the principal axis
- B. through the main focus
- C. without any deviation
- D. through the center of curvature
Correct Answer: parallel to the principal axis
Concept & Solution Analysis: A ray of light appearing to meet at the principal focus of concave lens emerge after refraction will be parallel to the principal axis.
601. What is the speed of light in air?
- A. 3×105 m/s
- B. 3×104 m/s
- C. 3×108 m/s
- D. 3×106 m/s
Correct Answer: 3×108 m/s
Concept & Solution Analysis: The speed of light in the air is 3×108 m/s. Light travels in a straight line. Light in the air is 1.0003 times slower than the light in a vacuum.
602. How is the refractive index of a substance related to the speed of light in air?
- A. Refractive index = speed of light in air × speed of light in matter
- B. Refractive index = speed of light in air + speed of light in matter
- C. Refractive index = speed of light in matter / speed of light in air
- D. Refractive index = speed of light in air / speed of light in matter
Correct Answer: Refractive index = speed of light in air / speed of light in matter
Concept & Solution Analysis: Refractive index, also called index of refraction, measure of bending of ray of light when it passing from one medium into another. Refractive index is also equal to velocity of light c of a given wave length in empty space divided by its velocity v in a substance. i.e. n = c/v Absolute refractive index = speedof lightin vacuum speedof lightinmedium Refractive index of matter = speedof lightinair speedof lightinmatter
603. What are the main instruments in a SONAR, which are used to find the distance, direction and speed of an underwater body?
- A. Amplifier and speaker
- B. Speaker and microphone
- C. Transmitter and detector
- D. Amplifier and microphone
Correct Answer: Transmitter and detector
Concept & Solution Analysis: Sonar stands for Sound Navigation and Ranging. It is made up of two parts transmitter and detector. Transmitter produces Ultrasound waves and detector reflect it and converts it to the electrical signal. It is used to measure the depth of the sea and to locate under grounds objects.
604. Which of the following can be measured with the help of SONAR?
- A. Distance of airplanes
- B. Sound produced by animals in the forest
- C. Aircraft pitch
- D. Distance, direction and speed of objects present under water.
Correct Answer: Distance, direction and speed of objects present under water.
Concept & Solution Analysis: With the help of SONAR the distance, direction and speed of the objects present under the water are measured. The depth of ocean also measured by SONAR The full form of SONAR is Sound Navigation and Ranging.
605. What is the repetition of sound, produced by the reflection of sound waves?
- A. Double
- B. Echo
- C. Noise
- D. Note
Correct Answer: Echo
Concept & Solution Analysis: The repetition of sound, produced by the reflection of sound wave is called Echo. Echo is the phenomenon of a repetition of sound due to its reflection from the surface of a large obstacle. When a loud sound is produced in an empty hall, the same sound is heard again after some time.
606. The frequency of an ultrasonic sound wave is greater than ……
- A. 2000 Hz
- B. 20 Hz
- C. 200 Hz
- D. 20000 Hz
Correct Answer: 20000 Hz
Concept & Solution Analysis: The frequency of an ultrasonic sound waves is more than 20000 Hz, the infrasonic is less than 20 Hz, and the frequency of audiable sound is in between 20Hz and 20000 Hz.
607. What is the approximate range of sound for humans?
- A. 20Hertz to 2000 Hertz
- B. 20Hertz to 200Hertz
- C. 20 Hertz to 20000 Hertz
- D. 2 Hertz to 2000 Hertz
Correct Answer: 20 Hertz to 20000 Hertz
Concept & Solution Analysis: Sound waves are a type of longitudinal waves that originate from vibrations in objects whose sound waves have a frequency less than 20 Hertz are called infrasonic sound waves while waves with a frequency between 20Hertz to 20000Hertz are audible waves frequency. High frequency (more than 20 kHz) sound waves are called ultrasonic waves.
608. At what stage should the medium required for the transmission of sound
- A. Solid
- B. Gas
- C. Fluid
- D. All of these
Correct Answer: All of these
Concept & Solution Analysis: Sound need is a material medium like solid liquid or gas to travel for their propagation because the molecule of solid, liquid and gasses carry waves from one point to another.
609. The amount of sound energy passing in the unit area per second is called
- A. intensity
- B. note
- C. pitch
- D. Music
Correct Answer: intensity
Concept & Solution Analysis: Intensity is defined as the amount of sound energy that passes through a unit area in unit time. It determines the loudness of the sound wave.
610. Which of the following is the time taken for one complete oscillation of a sound wave in the density of the medium?
- A. Time period
- B. The frequency
- C. Wavelength
- D. Dimensions
Correct Answer: Time period
Concept & Solution Analysis: Time taken by the wave for one complete oscillation of a sound weave in the density or pressure of the medium is called the time period.
611. The amplitude of the sound wave depends on
- A. Temperature of object
- B. Material of object
- C. Quality of material
- D. Force required to vibrate an object
Correct Answer: Force required to vibrate an object
Concept & Solution Analysis: The amplitude of the sound wave depends on the force required to vibrate the object. The amplitude of the sound wave depends on the force with which an object is made to vibrate. Amplitude is a measure of the size of sound waves. It depends on the amount of energy that started the waves. Greater amplitude wave have more energy and greater intensity, so they sound louder. The loudness of sound refers to intensity of sound waves. It depends on the amplitude of vibration.
612. What is the relation between frequency and time period
- A. T = f
- B. T = 1 + f
- C. T = 1 - f
- D. T = 1/ f
Correct Answer: T = 1/ f
Concept & Solution Analysis: Frequency refer to the number of occurrences of a vibration event per second and it is measured in cycle/second. Frequency is reciprocal of the time period. 1 T f = where f = frequency of wave.
613. If the frequency of a sound wave is 50 hertz, find its time period.
- A. 0.05 second
- B. 0.02 seconds
- C. 0.5 second
- D. 0.2 seconds
Correct Answer: 0.02 seconds
Concept & Solution Analysis: Frequency (f) = 50 hertz Time period (T) =? Time period (T) = 1 / f = 1/50 = 0.02 second
614. Identify in which type of weave, particles moves parallel to wave direction?
- A. Transverse
- B. Microwave
- C. Longitudinal
- D. Superficial
Correct Answer: Longitudinal
Concept & Solution Analysis: Longitudinal waves:- in these waves the particles of the medium vibrates in parallel direction to the propagation of the waves. Transverse wave:- Transverse wave, motion in which at all point on a wave oscillate along path at perpendicular to the direction of the wave’s distance. Microwave:- Microwave is a form of electromagnetic radiation with wavelength ranging from about one meter to one millimeter corresponding to frequencies between 300 MHz and 300 GHz respectively.
615. To convert the heat taken on the Kelvin scale to the Celsius scale
- A. Must subtract 273
- B. Must add 273
- C. Must divide by 273
- D. Must be multiplied by 273
Correct Answer: Must subtract 273
Concept & Solution Analysis: To convert the temperature taken on the Kelvin scale to the Celsius scale must subtract 273. 1 0 Celsius = K – 273 Relation between Celsius, Kelvin and Fahrenheit is- C F – 32 K – 273 = = 5 9 5
616. The force of buoyancy depends on the density and ............. of the liquid displaces.
- A. The direction
- B. Volume
- C. Power
- D. Energy
Correct Answer: Volume
Concept & Solution Analysis: The buoyancy force equal to weight of the liquid displaced by an object which is directly proportional to the density of the liquid and volume of the liquid displaced. b F = – gV ρ
617. Why a sound cannot be heard on the moon?
- A. No sound on the moon.
- B. Because there is no water on the moon.
- C. There is no atmosphere on the Moon and sound cannot travel without medium.
- D. People who go to the moon become deaf.
Correct Answer: There is no atmosphere on the Moon and sound cannot travel without medium.
Concept & Solution Analysis: Sound is mechanical waves. Whose transmission requires medium (solid, fluid, gas). Since there is no transmission of sound due to vacuum on the moon. So that no sound is heard there.
618. How is gravitational acceleration represented?
- A. From the Greek letter epsilon ε
- B. English small letter g
- C. English capital letter G
- D. By X
Correct Answer: English small letter g
Concept & Solution Analysis: Gravitational acceleration is represented by the small letter 'g' in English. Its value on Earth is 9.8 m/s2 .
619. What is the change in the gravitational force between two objects when the mass of one of the two objects is doubled?
- A. The force of gravitation is doubled.
- B. The force of gravitation is tripled.
- C. The force of gravitation becomes four times.
- D. The force of gravitation is halved.
Correct Answer: The force of gravitation is doubled.
Concept & Solution Analysis: In competitive exam questions on Physics – Miscellaneous, "The force of gravitation is doubled." directly satisfies the factual and conceptual condition asked in the stem, whereas options such as The force of gravitation is tripled. and The force of gravitation becomes four times. represent common distractor traps. Record this rule in your revision notes for quick pre-exam recall.
620. The tendency of an object at rest stays at rest and an object in motion states in motion is called
- A. Velocity
- B. Force
- C. Momentum
- D. Inertia
Correct Answer: Inertia
Concept & Solution Analysis: Inertia is the natural tendency of body resist any change in its state of rest or uniform motion in a straight line. For example, a book lying on a table will remain there until an external force is applied on it to remove or displace it from that position. Inertia is of three types. (i) Inertia of rest (ii) Inertia of motion and (iii) Inertia of direction.
621. Oneirology is the study of
- A. Dreams
- B. Animals
- C. Flowers
- D. Insects
Correct Answer: Dreams
Concept & Solution Analysis: Oneirology is concerned with the scientific study of dreams, where dreaming and brain functioning are correlated as well as understanding of brain working during dreaming Pertains to memory formation and mental disorders of studies. Study of flowers- Floriculture Study of insects - Entomology Study of fungae - Mycology Study of Gardening - Horticulture Study of fruit- Pomology
622. Food is cooked faster in the pressure cooker due to the
- A. Heat remaining inside
- B. Increase in the boiling point of water
- C. Release of steam by its whistle at regular intervals
- D. High amount of steam
Correct Answer: Increase in the boiling point of water
Concept & Solution Analysis: When food is cooked in the pressure cooker, the pressure inside the cooker becomes high, which raises the boiling point of water. As a result of it the temperature inside the cooker becomes more than 1000 C (which is the boiling point of water at normal pressure), so the cooking becomes faster.
623. The relative humidity is measured with the help of
- A. Piezoelectric meter
- B. Hygrometer
- C. Tensiometer
- D. Humidograph
Correct Answer: Hygrometer
Concept & Solution Analysis: The relative humidity is measured with the help of hygrometer. Hygrometer - Measures Relative humidity Tensiometer - Measures Soil Moisture tension Piezometer - Measures Liquid pressure Barometer - Measures Atmospheric pressure Pyrometer - Measures High Temperature Stethoscope - Measures Heart beat
624. What is the reason for the oil rising in the lamp wick?
- A. Capillary action
- B. Diffusion of oil through wick
- C. Oil is very light
- D. Surface tension
Correct Answer: Capillary action
Concept & Solution Analysis: Capillary Action is the reason for the oil rising in the lamp wick. Note :- Capillary Action is the phenomenon of fluid which upward or downward (rise/fall) movement of fluid in capillary tube that is called capillary action.
625. Which of the following colours of a rainbow has the shortest wavelength
- A. Red
- B. Violet
- C. Indigo
- D. Blue
Correct Answer: Violet
Concept & Solution Analysis: • Violet colour of a rainbow has the shortest wavelength. Red colour has the Longest wavelength in rainbow. The wavelength of violet is 400 nm and the wavelength of Red colour is 700 nm.
626. In Alternating Current, which of the following devices is used to easily and efficiently convert voltages from one voltage to another
- A. Rectifier
- B. Resistor
- C. Inverter
- D. Transformer
Correct Answer: Transformer
Concept & Solution Analysis: In Alternating current (AC), Transformer is used to easily and efficiently convert voltage from one level to another. Transformer was invented by "Faraday" and this device works on the principle of Electromagnetic Induction. Rectifier – A Rectifier is an electrical device composed of one or more diodes that is used for the conversion of AC to DC.
627. In physics, the particles called 'Higgs Boson' are also know as
- A. Queen of particles
- B. Prince of particles
- C. God particle
- D. King of particles
Correct Answer: God particle
Concept & Solution Analysis: In physics, the particles called ‘Higgs Boson’ are also known as ‘God Particle’ whose first hypothesis was given in the year 1964 and experimental verification was done on 14 march 2013.
628. Which of the following devices converts chemical energy into electrical energy?
- A. Inverter
- B. Dynamo
- C. Generator
- D. Battery
Correct Answer: Battery
Concept & Solution Analysis: Battery converts chemical energy into electrical energy. • Dynamo converts mechanical energy into electrical energy. • Inverter converts Direct Current (DC) into Alternative Current (AC). • Dynamo is also called as electric generator. Dynamos are most often found inside power plants. Electric generator based on Electromagnetic Induction principle was discovered in 1831 by Micheal Faraday.
629. Which of the following colours is NOT a primary colour
- A. Blue
- B. Orange
- C. Red
- D. Yellow
Correct Answer: Orange
Concept & Solution Analysis: Primary colours are basic colours that can be mixed together to produce other colours. They are usually considered to be Red, Yellow and Blue. Category Colour Primary Colour - Red, Yellow and Blue Secondary Colour - Orange, Green and Violet Tertiary Colour - Reddish-Orange and Orangish yellow Yellowish-Green and Greenish Blue Bluish-Violet and Violetish Red
630. Which of the following is NOT correct about a concave mirror?
- A. When the object is on focus, the image is formed at the infinite.
- B. The reflective surface of this mirror is embossed.
- C. It is used in vehicle headlights and searchlights
- D. Concave mirrors can produce both real and virtual images.
Correct Answer: The reflective surface of this mirror is embossed.
Concept & Solution Analysis: A concave mirror, or converging mirror , has a reflecting surface that is recessed inward (away from the incident light). Concave mirrors reflects light inward to one focal point. • Concave mirror is used in reflecting mirror. • It is used in vehicle headlights and searchlights.
631. Which of the following instruments is used to determine the area of irregular plots in a map?
- A. Mapometer
- B. Cartometer
- C. Segmometer
- D. Planimeter
Correct Answer: Planimeter
Concept & Solution Analysis: Planimeter is the instrument used to determine the area of irregular plots in a map. • Segmometer – It is a instrument used to measure the height of patient, who is unable to stand. • Cartometer–A device consisting of a small wheel and a calibrated dial used the measure distances on a map by following the desired route. • Mapometer–It is a google maps route planner for runners.
632. Which of the following helps us to find the depth of the sea?
- A. Echo sounder
- B. Decibel
- C. Sound level meter
- D. Tachometer
Correct Answer: Echo sounder
Concept & Solution Analysis: • Echo sounder - Depth of the sea. • Decibel - Unit to measure sound intensity. • Sound level meter - Device for measuring the intensity of noise, music and other sound. • Tachometer - Device for measuring rotation speed of a shaft or disk, as in a motor or other machine.
633. Sling Psychrometer is used to measure:
- A. Distance
- B. Speed
- C. Humidity
- D. Hygrometer
Correct Answer: Humidity
Concept & Solution Analysis: • Sling Psychrometer–To measures the relative humidity in the atmosphere. • Speedometer – Measures speed • Hygrometer – Measures the humidity or amount of water vapour in the air.
634. What was the code name of Pokhran-I nuclear test?
- A. Smiling Buddha
- B. Laughing Buddha
- C. Operation Shakti
- D. Operation Blowout
Correct Answer: Smiling Buddha
Concept & Solution Analysis: Operation Smilling Buddha (Ministry of External Affair designation: Pokhran-I) was assigned code name of India’s first successful nuclear bomb test on 18 may 1974. Note– On 27 March 2019, India tested anti - satellite weapon during an operation code-named Mission Shakti.
635. Which of the following statements about Dhanush Artillery Guns is INCORRECT?
- A. It has a strike range of 40 kilometers with accuracy and precision
- B. It is upgraded version of Swedish Bofors gun
- C. It also has night firing capability in direct fire mode
- D. None of the above
Correct Answer: It has a strike range of 40 kilometers with accuracy and precision
Concept & Solution Analysis: Dhanush Artillery Guns has a strike range of over 38 km with accuracy and precision. It is updated version of Swedish (155 mm) Bofors gun it also has night firing capability in direct fire mode. Note :– Dhanush is also surface to surface short range nuclear capable ballistic missile with strike range of 350 kms developed by the DRDO.
636. Bharat Stage Emission Standards are applicable to .............. . 1. Transport vehicles 2. Small Scale Industry 3. Power Plants
- A. Only 1
- B. 2 and 3 only
- C. 1 and 3 only
- D. 1, 2 and 3
Correct Answer: Only 1
Concept & Solution Analysis: Bharat Stage Emission Standards are applicable to transport vehicles. Note :– BSES are emission standards instituted by GOI to regulate the output of air pollutants from compression ignition engines and spark–ignition engines equipment, including motor vehicles.
637. Which Indian scientist demonstrated "the Mercury Coherer", similar technology used by Guglielmo Marconi in the invention of radio?
- A. Sir C. V. Raman
- B. Dr. Homi J. Bhabha
- C. Sir Jagadish Chandra Bose
- D. Dr. Sateyendranath Bose
Correct Answer: Sir Jagadish Chandra Bose
Concept & Solution Analysis: Jagadish Chandra Bose demonstrated "the mercury coherer" which is a radio wave receiver. This device was used by Guglielmo Marconi to build a radio. Bose, therefore, was a key figure in the invention of the modern radio and also in sonic technology.
638. Which of the following techniques can be used to separate cream from milk?
- A. Chromatography
- B. Distillation
- C. Filtration
- D. Centrifugation
Correct Answer: Centrifugation
Concept & Solution Analysis: Centrifugation is a mechanical process which involves the use of the centrifugal force to separate particles from solution according to their size. Shape, density, medium viscosity and rotor speed. The process of centrifugation can be easily used to separate cream from milk. To carry out this the milk is rotated at a very high speed in a centrifuge. The cream being lighter floats over the heavier and skimmed milk.
639. Which of the following is paired CORRECTLY?
- A. translucent – objects through which we cannot see through at all
- B. transparent – objects through which things can be seen clearly
- C. luminous – objects through which we can see, but not very clearly
- D. Opaque–objects that emit a light of their own
Correct Answer: transparent – objects through which things can be seen clearly
Concept & Solution Analysis: Transparent – Allows light to pass through it & through which we can see clearly. Luminous – objects that emits the light of their own. Translucent – Allows light to pass through it and we can see but not very clearly. Opaque – Does not allows the light to pass through it & we cannot see through it.
640. Expression of energy for a particle in one- dimensional box is
- A. E = n2 h2 /8ma2
- B. E = n2 h2 /4ma2
- C. E = n2 h/8ma2
- D. E = nh2 /8ma2
Correct Answer: E = n2 h2 /8ma2
Concept & Solution Analysis: Solving for E results in the allowed energies for a particle in box 2 2 n 2 n h E 8ma = This is an important result that tells us. 1. The energy of a particle is quantized. 2. The lowest possible energy of a particle is not Zero. This is called the zero-point energy and means the particle can never be at rest because it always has some kinetic energy. This is also consistent with the Heisenberg Uncertainty Principle if the particle had zero energy, we would know where it was in both space and time.
Physics – Miscellaneous — Competitive Exam Concept Guide…
Mastering Physics – Miscellaneous is essential for aspirants preparing for central and state competitive examinations including SSC (CGL, CHSL, MTS, GD, CPO), Railway Recruitment Boards (RRB NTPC, Group D, ALP, RPF LDCE), Banking (IBPS, SBI, RBI), UPSC Civil Services, CAPF, and State PSC/Police recruitment tests. This curated practice module presents 656 verified multiple-choice questions designed around latest Computer Based Test (CBT) trends and official syllabus weightage.
When practicing Physics – Miscellaneous questions, candidates should focus on identifying the core conceptual keyword in each question stem rather than memorizing isolated answers. Recruiting commissions frequently reframe the same underlying syllabus concept using statement-based assertions, chronological ordering, or negative-stem phrasing ("Which of the following is NOT correct?"). Reviewing both the correct option and the three distractor choices builds 360-degree topic retention.
Exam Weightage, Negative Marking & Pacing Framework
| Exam Family | Question Pattern in Physics – Miscellaneous | Negative Marking Rule | Target Time / Question |
|---|
| SSC Exams (CGL, CHSL, GD, MTS) | Direct factual recall, concept application & PYQ variations | 0.25 to 0.50 marks per wrong answer | 20–30 seconds |
| Railway (RRB NTPC, ALP, RPF LDCE) | Conceptual rules, statutory facts & stage-wise CBT sets | 1/3rd (0.33) marks per wrong answer | 25–35 seconds |
| UPSC, CAPF & State PCS | Multi-statement analytical & elimination-based MCQs | 1/3rd (0.33) marks per wrong answer | 45–60 seconds |
| Banking & Insurance (IBPS, SBI, LIC) | Speed-accuracy drills with sectional timer constraints | 0.25 marks per wrong answer | 25–40 seconds |
परीक्षा रणनीति एवं त्रुटि-पुस्तिका (Error-Log) रिवीज़न विधि
Physics – Miscellaneous के प्रश्नों को हल करते समय केवल सही उत्तर देखना पर्याप्त नहीं है। प्रत्येक प्रश्न को हल करने के बाद यह विश्लेषण करें कि अन्य तीन विकल्प क्यों गलत हैं। प्रतियोगी परीक्षाओं में अक्सर पिछले वर्षों के प्रश्नों (PYQs) के विकल्पों से ही नए प्रश्न बनाए जाते हैं।
जिन प्रश्नों में आपसे गलती होती है या जिनमें आपको दो विकल्पों (50-50 की स्थिति) में संदेह होता है, उन्हें अपनी त्रुटि-पुस्तिका (Error Log) में लिखें और 1, 3, 7 और 21 दिन के अंतराल (Spaced Repetition) पर दोहराएँ। इस वैज्ञानिक पद्धति से मुख्य परीक्षा में नेगेटिव मार्किंग न्यूनतम हो जाती है और आपका नेट स्कोर तेज़ी से बढ़ता है।